These are instructions on how to unlock your iPhone using SAM. This method will work with the iPhone 4S, iPhone 4, iPhone 3GS, and iPhone 3G on any jailbreakable firmware including 5.x. Step One Jailbreak your iPhone. You can find instructions on how to do that using the google Step 2 Tap to launch Cydia from your SpringBoard. Step 3 Press to select Manage from the tabs at the bottom of the screen. Step 4 Press the large Sources button. Step 5 Press the Edit button at the top right of the screen. Step 6 Press the Add button that appears at the top left of the screen. Step 7 Enter http://repo.bingner.com and press the Add Source button. Step 8 Press the large Return to Cydia button. Step 9 Press to select Bingner from the list of Sources. Step 10 Choose SAM from the list of packages. Step 11 Press the Install button at the top right of the screen. Step 12 Press the Confirm button to begin installation. Step 13 Once installation has completed press the large Restart SpringBoard button. Step 14 Insert your new SIM card and tap to select SAMPrefs from your SpringBoard. Step 15 Tap Utilities Step 16 Press to select De-Activate iPhone. Your ActivationState under "More Information" should now be "Unactivated". If you don't have De- Activate iPhone you can use De-Activate iPhone (clear push). Step 17 With SAM enabled, tap Method and choose By Country and Carrier. Step 18 Tap Country and choose the country of your ORIGINAL SIM. Step 19 Tap Carrier and choose your ORIGINAL carrier that your iPhone is locked to. Step 20 For some carriers operating more than one Carrier ID you may need to select SIM ID. If you are unable to activate in Step Twenty Four then you have selected the wrong one. Step 21 Tap More Information and copy the IMSI under SAM Details to the clipboard. Step 22 Tap Spoof Real SIM to SAM Step 23 Go back to the main SAM screen and paste the IMSI number in your clipboard. Step 24 Connect your iPhone to the computer and let iTunes reactivate your phone. "Double click "Phone Number" parameter at the main device screen and make sure that the ICCID matches that of your SIM card." If not you need to start over from Step Fourteen." Step 25 Unplug your iPhone from the computer and close iTunes. Step 26 Reopen SAMPrefs from your SpringBoard and disable it using the Enabled switch. Step 27 Connect your iPhone to the computer and launch iTunes again. You should get an error saying that your phone cannot be activated. This is normal. Just close iTunes and open it again. Step 28 In a short time you should see signal bars. Congratulations! Step Twenty Nine You should now backup your iPhone unlock ticket in case this method is ever blocked. You can find instructions on how to backup the unlock ticket here. IMPORTANT: If push notifications stop after this process, you can restore then with the Clear Push utility in SAM, followed by connecting to iTunes. Your phone will work normally with your SIM card and that SIM card ONLY since we have tricked iTunes to think that ICCID is one of the intended carrier's. The phone can be rebooted and connected to iTunes freely without losing the "unlock", at least for now. A big thanks to Loktar_Sun and Laforet for their contributions!